Insert the SIM card and battery
Safe removal. Always switch the device off and disconnect the charger before
removing the battery.
Important: This device is designed to be used with a standard SIM card (see figure)
only. Use of incompatible SIM cards may damage the card or the device, and may
corrupt data stored on the card. Please consult your mobile operator for the use of
a SIM card that has a mini-UICC cutout.
A SIM card may be already inserted in the device. If not, do the following:
1 Remove the back cover.
2 Remove the battery, if inserted.
3 Slide the SIM card holder, to unlock it.
6
Get started
4 Lift the SIM card holder up.
5 Make sure the contact area of the SIM card is facing toward the device, and slide
the SIM card into the SIM card holder.
6 Lower the SIM card holder into place. Slide the SIM card holder, to lock it.
7 Line up the battery contacts, and insert the battery.
Get started
7
8 To replace the cover, direct the top locking catches toward their slots, and press
down until the cover locks into place.
If the SIM card is not properly in place, the device can only be used in the offline profile.